This is my XP2000 locked with a multiplier of 11.5 instead of 12.5(stuffed the unlock ) This is using my Volcano 7+ modded HSF. Cant wait for my phase change system to get up and running



It has currently got 1.9Vcore running through it, but when I put it to 2.1V, it runs stable at 166FSB, just too damn hot for air cooling This is running with comfortable temps for me. BTW, this is at full load all teh time Folding

Now show me yours :wink:

coolz

Updated

[img]http://groups.msn.com/_Secure/0QQCyd84TqZUctwkuAN51nL6yBidz3GlB95lhdzrEtAgYC9uauG9afcA0WEVePtNMIVAE7WjLJr0YZTH
eGCEcYIn7l9r6J0pt2WMOvw68Xw/current.jpg?dc=4675410773399903459[/img]

I am guessing that's a t-bred cpu? Mines a palomino which aren't as good as overclockers. Especially the 2000's as they were towrds the end of the AGOIA run

The t-bred xp's are getting some great output in the world of overclocking. The t-bred B cores are fantastic

That's why I'm waiting until probably February to get another CPU. I want to be damn sure all of the Palomino A's are out of the channel before I get another one.

May as well wiat until march/april for the Barton core to come out. 512kb of L2 goodness

I thought you could unlock them to be the same as a T-bred, or close? If not, Im getting that 1,800 T-BRED over the 2,100 XP Palomino. hmmm

It is a t-bred b. So far I'm pretty happy with it but cooling it takes more than I thought it was going to. I'll probably go deaf from the fan i'm running on it.

Really my plan was to wait for Barton to come out but with AMD's delays and paper launching lately I changed my mind.

Nope, t-bred is a completely different core. 0.13 vs 0.18 of the palamino's

This is the one I just put together. It's a 2100 T-bred. It'll run at 2.24 but it's not stable at that speed. Kinda makes you wonder if spending $300 on a 2600 is worth it doesn't it?

[img]http://tinyurl.com/5ini[/img]

AIUHB 03018PRW $95 Air cooled with a

[img]http://tinyurl.com/5inq[/img]

Well, my 2100+ tbred b runs at 190x13 without a hitch

p4 2.0a @ 2.8ghz w/1.9v (it can up to 2.0v)

runs fine on stock intel cooling

Let's see some Sandra scores. :P

OK
I will post them after work

Where's the Intel scores? You're beating us by about 400 MHz. Show the scores.

I went and gout that Cpu-Z program, thats a nice alternative to Wcpuid. I like it better
http://www.cpuid.com/cpuz.php#download

Nice little app there...thanx

You want Sandra scores, you got em




The voltage is wrong in cpu-Z, it is actually running at 1.9 at that speed at around 47 C.

To get this score, I found it best to run your ram in sync with the processor, so when at 133, the ram was also at 133 Causes a few probs going out of sync

And yes, cpu-Z is a good one. I flicked wcpuid for it about 4 months ago

Nice

Are you still using the Vapochill?

I know what you mean about running in sync, I've noticed lower scores running async.

I'll see what I can do when I get the new boards tomorrow. These v1.1 NF7-S's (and v1.0) suck when it comes to voltage. All I can get out of them is about 1.79. And at that this chip craps out at around 2400MHz. I'm hoping to get a little more out of it by shoving at least 1.9 down its throat.

Nah, having a problem with the vapo's compressor It is starting to die a loud death and I just don't have the cash to replace it at the moment So air it is for a while me thinks...

Anyway, the title for this thread is air based overclocks so air it had to be :P

That sucks. I wondered when you said what your temps are at that speed. What board are you using?

8RDA+ Rev 1.1

At this time, I haven't done full testing for high o/clock stable. I just bumped it up to what I thought would work and it did

Now to try with 1 stick, 2 in single channel mode, etc. I need at least a full day to do what I intend to do

I wish my GA-7ZXR had a few more overclocking options so I could run my cpu bus at 133 (266DDR). My board is funny though, I can run my ram at 133MHz and my cpu's FSB at 112MHz...I always end up with weird products :P

Hey fxr91, what's your stepping on that chip? These 2600's are dogs. I almost want to RMA them.

The stepping for this bitch is AIUHB 0304 TPLW. I am now going to be doing bench's with the mem sticks in single channel rather than dual(dual reduces max o/clock) and then 1 stick at a time

Those must be better than the 0301's then. That thing is rocking

I'm jealous

I dunno, guys I know with prometias and vapo PE(the new one) are getting 2500+. I think this one could do much better with the vapo too but, oh well