I have 2 ATX motherboards sitting here and not having a thing to do with them

Board 1: BioStar: Model- GeForce 6100-M7 with a AMD Sempron 2800+....(Micro ATX style board)
Board 2: Microstar: Model- MS-6570 (link)


I'm looking for $100 for both, I don't need them...

anyone intrested?


if not, just going to overclock them to hell
figured someone could get good use out of them

How much for just Board #1? I am not long on cash at the moment, but would love to get the wife and kid's computer off the POS celeron.

$30 sound reasonable?

and I'll pay shipping

Yep, that will work. I can send you a MO.

Did you get me message Bull?

Got it and all is good.

ok hope yea like it and let me know when you get it

Peap, the 2nd one come with a chip?

indeed it does....and the heatsink is pretty big on it...lol
the pic isn't very good but that's the actual board

What's the chip speed, fsb speed, et al???

not sure...I'll find out for yea

CPU
Last check it's a AMD Athlon runing at like 2.x ghz I believe

• Supports Socket A for AMD® Athlon™/Athlon™ XP/Duron™ processors @FSB 100/133/166
• Supports 600MHz up to Athlon™ XP 2700+ processor or higher

Chipset

nVIDIA® nForce2 SPP Chipset
• Supports DDR200/266/333/400
• Supports external AGP 4X/8X

nVIDIA® nForce2 MCP Chipset
• AC97 Interface supporting up to two concurrent codecs
• Ultra ATA133 for the fastest hard disk throughput
• USB 2.0 EHCI/1.1 OHCI controller

FSB

• 100/133/166(200/266/333)MHz clocks are supported.

Main Memory

• Supports six memory banks using three 184-pin DDR DIMMs
• Supports up to 3GB PC3200/2700/2100/1600 DDR SDRAMs
• Supports both 64-bit and 128-bit DDR SDRAM
Note: nForce2 does NOT supports x4 memory device. 1GB can be made by other density of dram chip such as x 8, x16.

Slots

• One AGP (Accelerated Graphics Port) 1.5V 4X/8X slot
• Five 32-bit PCI bus slots (support 3.3v/5v PCI bus interface)
• One ACR (Advanced Communication Riser) slot

On-board IDE

• An IDE controller on the MCP2/MCP2-T chipset provides IDE HDD/CDROM with PIO, Bus Master and Ultra DMA133/100/66 operation modes
• Can connect up to four IDE devices.

On-Board Peripherals




• One floppy port that supports two FDD with 360KB, 720KB,1.44MB and 2.88MB
• 1 serial port
• 1 parallel port supports SPP/EPP/ECP mode
• 3 audio ports in vertical
• 1 Bluetooth pin header (Optional)
• 6 USB ports (Rear * 4/ Front * 2)
• 1 RJ-45 jack (Optional)

Audio

• Realtek ALC650 6-channel audio
- Dolby Digital 5.1 format (with MCP2-T option)

Network
Chipset integrated 10/100 Base-T Ethernet/Fast Ethernet

BIOS

• The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices and expansion cards of the board automatically.
• The mainboard provides a Desktop Management Interface (DMI) function which records your mainboard specifications.

Dimensions
30.5 cm(L) x 23 cm(W) ATX Form Factor

Mounting
6 mounting holes

Ta for the info. If you would be so kind, shoot me via PM your expectations for price and I will reply thusly also. Cheers and thanks for the prompt reply. Much appreciated.

I'm building a system around that MSI-6570 board right now. I have the K7N2 Delta version of the board which adds SATA connectors and options for IDE or SATA RAID. Seems to be a pretty solid board with many options for tweaking