Well, only had it for a couple hours..

Can't say much.. fooled around in BIOS for a bit...

Here's with stock cooling on NB and CPU with Intels thermal putty...

Pretty damn impressive IMO.. check out that PR

[img]http://groups.msn.com/_Secure/0QQDeAsoTc5LO*jGD9Te2vPBetKy62xWjzwPi*BYjm13aLPqPNZtydZhxvxFm0u1SdHkBfHcpecgZo*p
!W2aGzmUIkSKtnXq6jdIQV2wwZI/untitled.bmp?dc=4675423862623003275[/img]

Is that someone's overclocked box?

Right on GoKu!

SCREAMER

not bad memory boost either man

See I said the new P4's were good

we told you so..... all you Intel haters.... eat some crow now.....

wish I had one... way to go man...

Which CPU is that? I'm guessing the 2.4C (800MHz FSB), but I can't tell from squinting at your scaled down screenshots and I'm too lazy to try very hard, anyway. :wink:

Heh, yah, and I'm far from done. i got it to 5800 100 more, and only thing keeping me is right now my systems overheating, can't get the 7+ mounted.. everyone says its hard to do a p4, there right.... damnit this sucks..

I can get to prolly 6 gig which is awsome..

yes

ABIT IC7
Intel P4 2.4C
HyperX 2x256 PC 3,000 @ dcddr

Um, my PR rating on Sandra is 7,000

That's mine

troll, what are you'rs @?

Damn Goku how much speed do you want, that last pic you posted seems plenty fast enough.

Hehe jas, just going for a meesely 200 moer mbps

God, I love this CPU to hell, but it might be going back.

Yes, sigh.. its awsome.. but for some reason, my temps are outrageous.

Even without o/cing @ 140F

I was at that with my O/CED AMD.. god damn

I think I'm having probelms setting the CPU HS...

And, if thats it, Intel is too confusing for me....

So it might be an AMD Athlon XP 1,700, ABIT NF7-S

Anyone think this is wrong to do? This frigging HEAT is unbarable.

Any O/C it humps to 160F+!!!!!

I can only get mine to 2.93 GoKu...

I leave it stable at 2.88 it's only a 2.4B @533
She's at 114F after some BHD with da peeps

I shoulda waited, and got one of those

TMax for that CPU is 165F something is really wrong then if it's at 140 to 160

Place ur bets all...100 to 1 he's gonna burn it

1 dolar on he won't burn it till he tries 1 mor mhz

You're the RMA queen what vid card adn CPU you going to get next week?

Have you tried using some REAL thermal paste, rather than leaving the piss-poor thermal pad in the HSF you got with the proc?

I would get a Heat Sink that Intel approves for that processor. Those should be very easy to install from what I have heard.

Also, use Intel approved themal compound and apply us ultra thin...

but that's just me.

Dude, i would keep that system... man, would I keep it....

Your not wrong there, I would happily keep it too

GJ Pain, you win, its burnt out. And not from o/cing so suck it. And btw, those temps, are with out over clocking, so somethign is direly wrong. I have to get my money back, i might, and i might not re-buy one off of GOOGLEGEAR, its not only cheaper, but if i have to send it back again, newegg won't hate me.....

The temps were rediculous.. it crashed from heat during a flash game..

140 to 160 from a flash game....

And I can't afford a new heat sink guys....

I'm broke from this combo.....

I might be able to sell my t7+ to someone, but I wanna keep it..

seeing as im building an AMD system somewhere down the road...

God.. i want ta hell to keep this system, or buy a new one...

It was so fast @ stock speeds... damn thing...

Pain already said NO to helping me with a water cooling system, so thats out..

And LD... it had AS3 on, and still over heated ..

NewEgg wants 50 dollar restocking fee, im trying to get that waved...

We'll see i guess... sigh..

Dude, you need to be co-admin at Bull's China Shop!

Can I?....

*sigh

Sigh is right pain, what do you think I should do?

Buy same intel or buy that amd..

is the mobo alright
....is the 7 days passed yet??...i dunno im not there


for that amout of $$ u could get a damn good AMD system

If the temps shot up like that from a Flash game something was wrong with the cooling on the CPU. THAT's why you don't use the craptastic thermal pads that the HSF manufacturers are 'kind' enough to pre-apply to their HSG. ALWAYS, without question and without hesitation, REMOVE the thermal pad and use a decent quality thermal paste! Plus, you should always double check your HSF installation to make sure you got it installed correctly. If it's off even just a little bit, you can have heat realated problems.

If you don't want to have to re-apply thermal goop every few months, I'd recommend a non-silicon-based paste. No, it doesn't have to be Artic Silver (although I like their paste), but it should be a quality paste of some sort. Nanotherm, OCZ, whoever, just as long as it didn't come in a little plastic bag or from Radio Shack, you should be fine.

Pain, I got approved for it..

Either RMA'ing mobo and CPU or getting my money back..

They want 50 dollar restocking fee!!!!!!!!!!!!!!!!!!!!

ITS BROKEN!!!!!!!!!

If I can't get the 50 waved, im RMA'ing it.

If you'd quit screwing with things until they break, you wouldn't have to worry about restocking fees!